DV Record Audio
You only need to set DV Record Audio if you have a
digital camcorder with 32kHz/12-bit sound connected to
the front panel DV IN jack. Some digital camcorders
have two stereo tracks for audio. One is recorded at the
time of shooting; the other is for overdubbing after
shooting.
•With the Audio 1 setting, the sound that was record-
ed while shooting is used.
•With the Audio 2 setting, the overdubbed sound is
used.
Auto Chapter
During recording, chapter markers are added automati-
cally at fixed intervals. You can set this interval to 5 min-
utes or 10 minutes. To turn off automatic chapter mark-
ing, select “OFF”.
DISC Settings
Disc Initialize
When you load a blank disc, the recorder will initialize
the disc.
DVD-R: The recorder initializes the disc in Video mode. The
Record mode will always be Video mode.
DVD-RW: You will be prompted to initialize the disc in
Video mode (for maximum compatibility) or VR
mode (for maximum editing ability).
DVD+R: The Initialize menu appears. Select “Yes” then
press ENTER.
DVD+RW: The recorder initializes the disc in DVD+RW
mode.
Also, you can format the disc from the Setup menu as
shown below.
11
Press SETUP.
The Setup menu appears.
22
Use v / V to select the DISC option.
33
While the DISC option is selected, press B to
move to the second level.
44
Use v / V to select the Disc Initialize option.
55
Press B to move to the third level.
The Start icon is highlighted.
66
Press ENTER.
The Disc Initialize menu appears.
77
If the disc is a DVD-RW, use b / B to select the
desired Disc Initialize Mode (VR Mode or Video
Mode) then press ENTER.
If the disc is a DVD+RW, go to step 8.
88
Use b / B to select “OK”, and press ENTER.
It may take a few minutes to initialize the disc.
Caution
If you change the disc format, everything recorded
on the disc will be erased.
24
Initial Setup (Continued)
Select a mode.
All data on the disc will be deleted.
Comments to this Manuals