GoVideo DVR1000 User Manual Page 22
- Page / 38
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Normal Recording
Preparation:
Turn on the power on both the DVD+VCR and TV.
Tune the TV to the DVD+VCR output channel (CH 3 or 4) or
set the TV’s source selector to VIDEO.
If a direct VIDEO/AUDIO connection is made between the
DVD+VCR and the TV, set the TV’s source selector to
VIDEO.
11
Insert a video cassette with the record safety
tab intact.
22
Select the desired channel with
vv
/
VV
.
If you are recording from an external source via the
audio/video input jacks (on the Rear), select AV by
pressing the INPUT button.
33
Set the desired recording speed (SP or SLP)
with the SP/SLP button.
This DVD+VCR is not designed to record in LP mode.
44
Press REC (
zz
) once.
Recording will start. (The REC indicator will light on
the front panel display.)
The REC indicator appears only when the output
source is set to VCR.
If a cassette with no record safety tab is loaded, the
cassette will be ejected automatically.
55
Press STOP (
xx
) to stop recording.
If the tape reaches the end before STOP (x) is pressed,
the DVD+VCR will automatically stop, rewind, eject the
tape, and power off.
To pause recording
1 Press PAUSE/STEP (X) to pause the tape during
recording.
The REC indicator will flash on the front panel display.
2 When you want to continue recording, press
PAUSE/STEP (X) or REC (
zz
).
After 5 minutes in Pause mode, the tape will be stopped
automatically to protect the tape and the video heads.
To record one TV program while
watching another
1 Use TV/VCR to select TV mode during recording.
The TV indicator appears.
2 Using your TV’s remote control, select the channel to
be viewed.
ips
For best results, always use PAUSE/STEP (X) when making
changes during recording.
For example: To change channels during recording, first press
PAUSE/STEP (X) to put the unit in Pause mode. Select the
desired channel on the DVD+VCR, then press PAUSE/STEP
(X) again to resume recording.
Timer Recording
The DVD+VCR can be programmed to record up to 8
programs within a period of 1 year. To set a timer record-
ing, simply enter the channel to be recorded and the
starting and ending times.
Preparation:
Turn on the power on both the DVD+VCR and the TV.
Be sure the TV is set to the DVD+VCR output channel (3 or 4).
Make sure the TUNING BAND in the TUNING menu is set
appropriately (TV or CATV).
11
Press MENU to display the MAIN menu.
22
Use
vv
/
VV
to choose the PROGRAM menu.
33
Press ENTER to go to the PROGRAM menu.
The PROGRAM menu will appear.
If all 8 programs have been entered, the message
FULLY PROGRAMMED will appear for a moment and
then PROGRAM 1 will appear on the TV screen.
44
Use
bb
/
BB
to choose the PROGRAM No. (1-8).
55
Use
VV
to choose the MONTH option.
Use
bb
/
BB
to choose the desired month.
66
Use
VV
to choose the DAY option.
Use
bb
/
BB
to choose the desired day.
77
Use
VV
to choose the START option.
Use
bb
/
BB
to choose the desired start time.
88
Use
VV
to choose the STOP option.
Use
bb
/
BB
to choose the desired stop time.
99
Use
VV
to choose the CHANNEL option.
Use
bb
/
BB
to choose the desired channel
(Channel, AV).
Cable Users: If you have CABLE TV and used Cable Box
in Connecting Antenna/Cable TV to DVD+VCR (page 11),
using a cable box converter, you must set the channel in
this step to match the cable box output channel (usually
CH 3 or 4). Change channels on the cable box instead of
on the DVD+VCR.
If you try to set the program timer before setting the clock,
PLEASE SET THE CLOCK appears for a moment and
then the CLOCK menu appears on the TV screen. Set the
time and date before proceeding.
Make sure a tape is in the DVD+VCR and the record safe-
ty tab is in place or the tape will be automatically ejected.
22
VCR Operation (Continued)
Things to know before starting
- DVR1000 1
- Safety Precautions 2
- IMPORTANT SAFETY INSTRUCTIONS 3
- Table of Contents 4
- Before Use 5
- Before Use (Continued) 6
- Front Panel Controls 7
- Front Panel Display 8
- Remote Control 9
- Connections Panel 10
- Connections 11
- Connections (Continued) 12
- Basic TV Connections 12
- On-Screen Display (OSD) 14
- On-Screen Menus Setup 14
- VCR Operation Setup 14
- Channel Selection 15
- VCR Setup Menu Options 15
- Setting the Clock 16
- DVD Operation Setup 17
- General Explanation 17
- On-Screen Display 17
- Initial Settings 18
- PREPARATION 19
- Parental Control 20
- VCR Operation 21
- Normal Playback 21
- Special Effects Playback 21
- Normal Recording 22
- Timer Recording 22
- VCR Operation (Continued) 22
- Tape Counter Memory Feature 25
- Additional Information 25
- DVD Operation 26
- Playing DVDs 26
- General Features 26
- DVD Operation (Continued) 27
- General Features (Continued) 27
- Special DVD Features 28
- OPERATION 29
- Notes on MP3 Recordings 29
- 5/32 Picture5.jpg1024X768 31
- Troubleshooting 33
- Troubleshooting (Continued) 34
- Language Code List 35
- Country Code List 36
- Specifications 37
- LIMITED WARRANTY 38
Related products and manuals for DVD players GoVideo DVR1000
DVD players GoVideo R6750 User Manual
(44 pages)
(44 pages)
DVD players GoVideo DP6240 User Manual
(32 pages)
(32 pages)
DVD players GoVideo HT2010 User Manual
(45 pages)
(45 pages)
DVD players GoVideo DVP1100 User Manual
(44 pages)
(44 pages)
DVD players GoVideo D640 User Manual
(26 pages)
(26 pages)
DVD players GoVideo 525p User Manual
(30 pages)
(30 pages)
DVD players GoVideo DHT7000 User Manual
(52 pages)
(52 pages)
DVD players GoVideo DV3130 User Manual
(70 pages)
(70 pages)
DVD players GoVideo DJ530 User Manual
(28 pages)
(28 pages)
DVD players GoVideo VR5940 User Manual
(66 pages)
(66 pages)
© 2020, manymanuals.com. All rights reserved. | 0.936 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals